Profiles; Selecting A Profile - Kyocera ECOSYS M4132idn User Manual

Quick Print
3
4
5

Profiles

Selecting a Profile

1
2
3
1
2
3
4
4-4
Click Edit.
In the Edit Quick Print Options dialog box:
To add a feature to the Quick Print tab, select the feature under Available,
and click the arrow to move the feature to Selected. A maximum of 5
features can appear under Selected.
To remove a feature from the Quick Print tab, select the feature under
Selected, and click the arrow to move the feature to Available. To use only
the Printer profiles in the Quick Print tab, move all features to Available.
Click the up or down arrows to change the position of the features under
Selected. The feature at the top appears first in the Quick Print tab.
To restore the list to factory default options, click Reset.
Click OK to save your settings.
With this feature, you can save printer driver settings as a profile. You can
select multiple options in the Quick Print tab and the other Printing
Preferences tabs, save them to a profile, and use all of them at once when you
apply the profile. You can then use that profile to print the same type of print job
again without having to reselect all the settings. In Printing Preferences, the
Save As and Profiles buttons appear at the bottom of all tabs.
A maximum of 26 profiles can be established in one driver, including the
Factory Default profile. In Device Settings > Administrator, you can choose
to hide the Factory Default profile. Settings made in Device Settings cannot
be saved to a profile.
Any profile except Factory Default can be edited, deleted, imported, and
exported.
Quick Print tab
In the Quick Print tab, select a profile. The settings list shows a summary of
settings for that profile.
Click Apply.
Click OK.
Profiles dialog box
In any of the Printing Preferences tabs, click Profiles.
In the Profiles dialog box, select a profile. The settings list shows a summary of
settings for that profile.
Click Apply.
Click OK.
User Guide