Removing The A.c. Magneto; Installing The A.c. Magneto - Yamaha YFM45FXV Supplementary Service Manual

2
1
A.C. MAGNETO

REMOVING THE A.C. MAGNETO

1. Remove:
• collar 1
NOTE:
When loosening the rotor bolt, use a wrench 2
to hold the collar.
2. Remove:
• A.C. magneto cover
• gasket
• dowel pins
NOTE:
Working in a crisscross pattern, loosen each
bolt 1/4 of a turn. Remove them after all of
them are loosened.
3. Remove:
• rotor 1
NOTE:
Use the flywheel puller 2.
Flywheel puller
P/N. YM-01404, 90890-01404

INSTALLING THE A.C. MAGNETO

1. Apply:
• sealant (Quick Gasket
(into the slit)
Yamaha bond No. 1215
(Three Bond No. 1215
P/N. 90890-85505
2. Install:
• woodruff key
• rotor
NOTE:
• Before installing the rotor, clean the outside
of the crankshaft and the inside of the rotor.
• After installing the rotor, check that the rotor
rotates smoothly. If not, reinstall the key and
rotor.
– 51 –
ENG
®
) 1
®
)