A.C. MAGNETO
3. Install:
• dowel pins
• gasket
New
• A.C. magneto cover
NOTE:
• When installing the A.C. magneto cover, use
a long rod to hold the rotor in position from
the outside. This will make assembly easier.
Be careful not to damage the oil seal.
• Tighten the bolts in stages, using a criss-
cross pattern.
4. Install:
• collar 1
NOTE:
• When tightening the rotor bolt, use a wrench
2 to hold the collar.
• Before installing the collar, do not forget to
install the O-ring.
– 52 –
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
50 Nm (5.0 m · kg, 36 ft · lb)