Storing A Number In Memory - Radio Shack ET-1106 User Manual

43-1106.fm Page 22 Wednesday, April 26, 2000 10:30 AM
Notes:
• If the dial type is set to
to use tone dialing for a memory number, you must store
the tone entry ( DIAL TYPE TONE
number you want to tone dial.
• To keep your accounts secure, we recommend you do not
store your personal access codes for services such as
bank-by-phone in a memory location.
• When storing numbers for special services, store the ser-
vice's main phone number in one memory location and
numbers for additional information in other locations.

Storing a Number in Memory

Make sure the handset is
stored when the phone is on hook.
1. Enter the number you want to store.
2. Press on the handset to display the categories.
OK
9 9 9 9 8 8 8 8
3. Press or until
4. Press to enter the program.
OK
TION _ _ appears on the display.
5. Press the memory location number (01–20) where you
want to store the number. A ringing tone sounds, and the
phone number is stored in memory.
22
DIAL TYPE PULSE
) as the first entry of the
. Phone numbers can only be
OFF
PROGRAM SPEED DIAL
PGM SPD DIAL LOCA-
Operation
and you want
appears.