Table of Contents
Advertisement
User Manual for AyAlarm
V2.1
4.2Startup
Press the central button of the device for 2 seconds in order to turn on AyTerminal. A correct
startup is indicated by the LED blinking green and a simple animation is shown on the display
Figure 4-8.
4.2.1Loading screen
In few seconds after LED is ON the AyTerminal loading screen will be displayed, as presented in
Figure 4-9.
Figure 4-9 AyTerminal loading screen – standard and jumbo mode
4.2.2Emergency call mode
During AyTerminal startup, if there is no SIM card inserted, or the inserted SIM card is not locked
to the AyTerminal, only the following menu will be available:
Choosing the emergency call item by pressing the accept button it is possible to initiate an
emergency call. The GSM mobile phone standard includes 112 as emergency number. In
countries where 112 is not the standard emergency phone number the emergency call is
redirected to the local emergency phone number, if it exists.
Figure 4-11 Emergency call menu – standard and jumbo mode
4.2.3PIN/PUK input
If the SIM card was inserted correctly and the SIM PIN control is enabled the following screen will
be shown. The selected digit can be changed by using the up/down navigation buttons (digit range
Figure 4-8 AyTerminal simple animation
loading
...
Figure 4-10 AyTerminal emergency call menu structure
Emergency call
Turn off
loading
...
Emergency call
Turn OFF
Emergenc
Turn off
AyTerminal
AyAlarm application
Advertisement
Table of Contents
