Radio Shack 43-3827 Owner's Manual page 40

Ô Ô
NOTE
The system will only
playback messages for four
minutes and then it returns
to command waiting mode.
To continue playing your
messages, press then
0
again within 15 seconds.
40
4. You may continue to listen to the Help
Guidance, or you may select a command from
the following chart. Ô
Command
0 then 1
0 then 2
0 then 3
2
0 then 4
0 then 5
0 then 6
0 then 7
0 then 8
0 then 9
1 then 0
*For Memo Record and Greeting Message Record
function, the first time you enter the corresponding
command, it starts the Recording function. If you
want to stop the recording, enter the command
again.
5. After all of the Help Guidance prompts have
played, you hear intermittent beeps indicating
that the system is in the command waiting
mode. You may enter another command at this
time from the chart.
6. When you are finished, hang up to exit the
system. The answering system automatically
returns to standby.
Function
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop*
Greeting Message Record/Stop*
Answer System Off
Help Guidance