Pabx Code; Dial Mode - AT&T CN5345 User Manual

Telephone settings
Telephone base settings

PABX code

If your office uses PABX (Private Automated Branch Exchange) system to
operate, when you dial an external number, you will need to input a PABX code
first.
You can set the PABX code on the telephone base
inserted as a prefix before the external number, when you make a external call.
1. Press 设置/时钟
SET_PABXCODE.
2. Press 设置/时钟.
3. Use the dialing keys to enter the PABX code, with a maximum of 2 digits.
4. Press 设置/时钟 to save the setting.
•
返回/取消
Press

Dial mode

The default value of dial mode that is preset in your phone should be the best
suited for your country network and therefore you are not suggested to change
it. If you need to change it, consult your local service provider for getting the
correct settings of this feature.
1. Press 设置/时钟, and then press
2. Press 设置/时钟.
3. Press
or
4. Press 设置/时钟 to save the setting.
•
返回/取消
Press
n idle mode, and then press
i
to return to the idle mode.
to scroll to TONE or PULSE.
to return to the idle mode.
, so that the PABX code will be
or
to scroll to SET_DIALMODE.
or
8
to scroll to