Radio Shack 43-3535 Owner's Manual page 27

to delete a character. To
DEL
delete all characters, hold down
for at least 1 second.
CH/DEL
Ijeh[ Ijeh[ DkcX[h Ijeh[ Ijeh[ DkcX[h DkcX[h DkcX[h
6. Press .
SEL
7. Enter the number and any tone
and pause entries (see "Using
Tone Services on a Pulse Line" on
Page 23 and "Entering a Pause").
±
8. Press . The phone beeps and
SEL
C[ceho d d d d Ijeh[Z C[ceho C[ceho C[ceho Ijeh[Z Ijeh[Z Ijeh[Z
appears (
number). After a few seconds,
C[ceho Ijeh[ C[ceho Ijeh[
C[ceho C[ceho Ijeh[ Ijeh[
appears, and you
can repeat Steps 3–8 to store
more numbers.
To replace a stored number, simply
store a new one in its place.
'PVGTKPI"C"2CWUG
In some telephone systems, you must
dial an access code (9, for example)
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number; however, you should
also store a pause after the access
code to allow the outside line time to
connect.
appears.
±
"016'"
Each tone or pause
entry uses one digit of
memory.
d d d d
=
±
"
27