Radio Shack 43-3535 Owner's Manual page 25

up to 20 digits, and each name can be
up to 14 characters.
5VQTKPI"C"0WODGT"CPF"0COG"
KP"/GOQT[
1. Lift the handset.
2. Hold down until
MEM
and a list of memory location
numbers appears.
3. Select an empty memory location
(or the one you want to replace) by
entering the location number (
8 8 8 8 9 9 9 9
or using or to scroll through
the list.
Ijeh[ Ijeh[ Ijeh[ DWc[ Ijeh[ DWc[ DWc[ DWc[
4. Press .
SEL
you do not want to enter a name,
skip to Step 6.
5. To enter a name, use the number
keys.
Refer to the letters on the number
keys to select the desired letter.
Press the key once for the first
letter in the upper case, press
twice for second letter in the upper
case, and so on. To enter the lower
case letter, press four times (or five
times) to display the first letter in
lower case, five or six times for
second letter, and so on.
C[ceho Ijeh[ C[ceho C[ceho C[ceho Ijeh[ Ijeh[ Ijeh[
– )
1 0
appears. If
25