2. Route the
adapter and
Modular
modular
Cord
cords
through
the grooves
on the back
AC Adapter Cord
of the base as
shown here.
3. Plug the short modular cord into
the wall plate jack, then align the
base's keyhole slots with the wall
plate studs and slide the base
down to secure it.
4. Plug the adapter into a standard
AC outlet.
1P"C"9CNN
To mount the phone directly on a wall,
you need two screws (not supplied)
with heads that fit into the keyhole slots
on the back of the base.
15
1. Drill two holes 3
/
16
mm) apart. Then thread a screw
into each hole, letting the heads
1
extend about
/
inch (3 mm) from
8
the wall.
inches (100
11