The Tandem Configuration; Create, Modify Or Consult Your Interphony List (Max. 10 Numbers); Configure Your Phone For Teleworking - Alcatel-Lucent 8008 User Manual

8008 DeskPhone

8.20 The Tandem configuration

This configuration lets you group sets under a single phone number. Your set is then the main set and
the other sets, usually a DECT, a remote extension, a DeskPhone or softphone, are secondary sets.
Each set has its own directory number, but the tandem number is that of the main set. When you receive
a call, all sets ring simultaneously. When one of the sets answers, the other sets stop ringing. When all
the lines of the main set are busy, the secondary sets did not ring. A secondary set can still be called by
its own number, but in this case, the tandem function will no longer be taken into account. Most of the
functions are common to all sets, for example: forwarding, meet-me reminder, the various messages,
etc., while others are specific to each set, for example: individual directory, last number redial, out of
service, locking, etc. Tandem mode supports up to 4 secondary devices.
For more information regarding this configuration, contact the person in charge of your installation.

8.21 Create, modify or consult your interphony list (max. 10 numbers)

•
Reach the 'Menu' page.
•
Settings My services Interphony
•
Enter your password.
•
Select an entry.
•
Follow the on-screen instructions.

8.22 Configure your phone for teleworking

Your IP phone is compatible with teleworking (VPN) via a secure connection (encrypted). In this mode,
all features available at your office will be ready for use remotely.
If the telephone system of your enterprise is configured to accept remote workers (system and
infrastructure), you have to configure your deskphone to be ready for teleworking. Your installer has to
give you all information to configure your deskphone.
You have to:
•
Enable VPN.
•
Enter the remote VPN server information.
•
Enter the TFTP server information (optional).
•
Enter authentication.
•
Setup the VPN start preferences.
8.22.1 First connection as teleworking
When you connect your deskphone for the first time remotely, you are prompted to set a PIN code.
The PIN code is requested when you enter in the VPN configuration (submenus) or when you boot your
deskphone (depending on the VPN configuration).
The PIN code is retained during the session so that you can access the VPN configuration without
having to re-enter your PIN code until you exit the VPN configuration.
Before configuring your phone for teleworking, check if you have all the information from your
administrator.
8AL90349ENAAed01
38 /50