Page 1
IP65 Voltage Adapter Instructions The IP65 Voltage Adapter (the Product or Adapter) enables safe and reliable operation of the 174x Logger family in harsh environments. The adapter seals and protects the terminals of the voltage measurement inputs and power supply from water and dust.
Safety Information A Warning identifies conditions and procedures that are dangerous to the user. Warning To prevent possible electrical shock, fire, or personal injury: • Read all safety information before you use the Product. • Do not alter the Product and use only as specified, or the protection supplied by the Product can be compromised.
Page 3
Table 1 is a list of symbols used on the Product or in these instructions. Table 1. Symbols Symbol Description Consult user documentation. WARNING. RISK OF DANGER. WARNING. HAZARDOUS VOLTAGE. Risk of electric shock. Measurement Category III is applicable to test and measuring circuits connected to the ...
Before You Start Below is a list of the items included with purchase. Carefully unpack and inspect each item. • 1x IP65 Voltage Adapter • 3x Screw M3 X 12 mm • 2x Coupler F/F 4 mm • 2x Alligator Clips (blue) •...
Page 5
Figure 2. Adapter Attachment Table 2. Mains Connection Item Description Safety Plugs Couplers MA-C8 Power Cord Removal Note For frequent use in IP65 environments, keep the Adapter installed on the Logger. To remove the Adapter from the Logger: Unfasten the screws.
1000 V LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.