The Live View page
The following provides an overview of the controls found on the Live View page. If the
AXIS 214 PTZ has been customized (from Setup > Live View Config > Layout), the
controls will be displayed accordingly:
The Video Format drop-down list allows the video format on the
Live View page to be temporarily changed.
The 2 types of Output button
each control the output
directly from the Live View
page. These are configured
under Setup > Live View
Config > Layout.
These buttons start/stop the Sequence Mode which automatically
displays the view from preset positions at set intervals. Sequence mode is
configured in Setup > PTZ Configuration > Sequence Mode.
The source list is used to select the preset positions already
configured in the camera. These are created in Setup > PTZ
Configuration > Preset Positions.
The Manual trigger buttons trigger an action directly from the Live
View page. These buttons are configured under Setup > Live View
Config > Layout. Click these buttons to manually start and stop events.
Use the Snapshot button to capture a snapshot of the image currently
being displayed in the window. Right-click on the image to save it in
JPEG format on your computer.
AXIS 214 PTZ - Accessing the camera
Pulse - click this button to activate the
output for a defined period of time, e.g.
to switch on a light for 20 seconds.
Active/Inactive - click these buttons to
manually start and stop a connected
device, e.g. switch a light on/off.
11