Radio Shack CT-400 Owner's Manual page 50

17-1101.fm Page 50 Wednesday, July 21, 1999 9:57 AM
• If the selected memory is full, the phone
prompts you to replace the contents (
PLACE CONTENT?
To replace the contents, press
phone displays STORED
• If both the name and phone number are al-
ready stored (a duplicate), the phone dis-
plays ALREADY STORED
you to move the information to the first
empty speed-dial memory (such as
TO 5? ). Press
the suggested location, or enter the desired
location number then press
• To exit the memory function without storing
the number, press
NOT STORED and the number you tried to
store. Hold down
Hints:
• Using Memory Location 1 — You can hold
down for about 2 seconds (see "One-
1
Touch/Speed Dialing" on Page 51) to quickly
dial the number stored in memory location 1.
For convenience, store a frequently called
telephone number (such as your home or of-
fice number) in this location.
• Using Memory Location 40 — Setting the
phone to use the call restriction level
ING ONLY (see "Selecting a Call Restriction
Level" on Page 21) does not prevent you from
speed-dialing the number stored in memory lo-
cation 40. If you plan to use this call restriction
50
RE-
).
. The
OK
.
, then it prompts
MOVE
to store the number in
OK
.
OK
. The phone displays
CLR
to clear the display.
CLR
INCOM-