Using A Stored Calling Card Number - Radio Shack CT-400 Owner's Manual

17-1101.fm Page 43 Wednesday, July 21, 1999 9:57 AM
Note: To exit without changing the calling card
settings (if you are changing only the access
number, for example), press
6. Enter the card number, then press
The phone briefly displays
that the selected card information is activated
and stored.
To clear a stored calling card number, follow Steps
1–4 and select the setting
phone erases all card information and exits the
menu.

Using a Stored Calling Card Number

Follow these steps to make a long-distance call us-
ing the calling card number you stored.
1. Enter the desired area code and phone num-
ber, then hold down
plays CARD CALL
remains on the display until the access num-
ber is sent to the network, then the phone
prompts you to wait for a tone or voice prompt
(
WAIT FOR PROMPT
Note: If no calling card is stored in memory,
the phone makes a normal call to the phone
number you entered.
.
CLR
.
OK
STORED to confirm
NO CARD in Step 4. The
until the phone dis-
SEND
and IN USE . CARD CALL
).
43