SENDO X User Manual page 155

18
!
To pair your headset
1. Before using your headset for the first time, you
must pair it with your Sendo X phone. First, make
sure your phone and headset are both on.
2. Place the headset and phone where they are
easily viewable.
3. In the Menu
joypad to scroll to the
press Select
4. Scroll to Bluetooth
5. A list of Bluetooth settings is displayed. Highlight
the Bluetooth
to switch the setting to On.
6. On your headset, press and hold both the call
control and volume up buttons for about 2
seconds until the indicator light begins to flash
red then green.
7. Your headset will now remain discoverable for
approximately 60 seconds.
8. On your phone, press the right ] joypad key to
navigate to the
9. Press Options
device. Your phone will search for all Bluetooth
enabled devices within the 10 metre range, and
display a list of devices found.
10. Use the joypad to scroll to the
and press
enter a passcode. Using the numeric keypad,
enter four zeros "0000". You do not need to
memorise the passcode as it is used only once.
screen of your phone, use the
Connectivity
A.
and press Select
setting, and use the Select
Paired devices view.
g and select
New paired
Sendo X
A. You will be prompted to
Select
11. Your Bluetooth headset is now added to the
paired devices list, which is displayed when you
open the
12. When pairing is successful, the headset will
sound a tone and return to standby mode.
See Using your headset on Page 151
and receiving calls using your headset.
icon, and
z Note:
seconds, the headset will return to on/standby
A.
mode without sounding a success tone. Repeat
the pairing process.
A key
!
To wear your headset
z Note:
earloop from the headset by pulling gently at
the base of the earloop ring.
1. To wear the headset on your right ear, turn the
earloop so the letter R is facing outward. Snap it
onto the headset by applying gentle pressure on
the base of the earloop ring.
To wear the headset on your left ear, turn the
earloop so the letter L is facing outward. Snap it
onto the headset by applying gentle pressure on
the base of the earloop ring.
z Note:
earloop and a larger earloop. Use the earloop
Headset,
that gives you the best speaker/microphone
position and the best comfortable fit.
2. Slide the headset over your ear - using one
hand, gently slide the earloop behind your ear in
150
Paired devices view.
If pairing is not completed within 60
To remove an earloop, simply unsnap the
Your headset is provided with a small-size
Sendo X User Guide
before making