Table of Contents
Advertisement
2-2. Installing the projector
2-2-1. Adjustment of the projector's settings (Level adjusters)
The projector must be placed square to the screen otherwise keystone distortion may appear on the screen. For set-
ting the projector perpendicular to the screen when viewed from the side, utilizing the level adjusters equipped at each
corner of the projector bottom. Maximum Adjustable length of the level adjuster is 10 mm/0.39".
Example for adjustment
NOTE:
• Do not lengthen each level adjuster longer than 10 mm/0.39". The force of doing so may cause the level adjuster to come off,
resulting in damage to the projector.
• Pay attention to lengthen or shorten two level adjusters at front at the same time. Same for the rear adjusters, otherwise, the
weight of the projector is loaded on one level adjuster and it may cause of damage to it.
Lower
Raise
11
2. Setting Up Your Projector
Level adjuster
Lower
Raise
Advertisement
Table of Contents
