Mounting The Lens Unit - NEC PH1202HL Installation Manual

Hide thumbs Also See for PH1202HL:
Table of Contents

Advertisement

2-4. Mounting the Lens Unit

MODEL
NP-9LS08ZM1
NP-9LS12ZM1
NP-9LS13ZM1
NP-9LS16ZM1
NP-9LS20ZM1
NP-9LS40ZM1
NOTE:
• The other NEC optional lenses are not available on this model.
• The projector and lenses are made of precision parts. Do not subject them to shock or excessive forces.
• Remove the lens unit when moving the projector. If not, the lens could be subject to shock while the projector is being moved,
damaging the lens and the lens shift mechanism.
• When removing or installing the lens unit, return the position of the lens to the center before turning off the power to the projec-
tor.
• When installing or removing the lens unit, first confirm that the main power switch to the projector is off, and then disconnect
the AC power supply. After the AC power supply has been disconnected, allow the projector to sufficiently cool before starting
this work.
- Never touch the lens surface while the projector is operating.
- Be very careful not to let dirt, grease, etc., on the lens surface and not to scratch the lens surface.
- Perform these operations on a flat surface over a piece of cloth, etc., to prevent the lens from getting scratched.
- When leaving the lens off the projector for long periods of time, mount Dust-proof cushion on the projector to prevent dust or
dirt from getting inside.
• Never turn on the light source without mounting the lens. It may cause of serious damage to your eyes by strong light.
Since NP-PH1202HL is a laser projector, we do not release the procedure to mount an optional lens, i.e., mount and
adjustment of an optional lens must be performed by a qualified technician.
NP-9LS08ZM1 is used in the explanation For other lens units, please take same procedures to mount, however,
the lens hood is equipped on NP-9LS08ZM1 exclusively, the procedure to mounting/removing the lens hood is not
required for others. At the same time, the image adjustment mechanism by manual besides the focus adjustment is
also equipped on NP-9LS08ZM1.
Magnification
0.90 - 1.35
1.27 - 1.82
1.41 - 1.82
1.71 - 2.87
2.25 - 4.18
4.31 - 6.77
2. Setting Up Your Projector
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ph1002hl

Table of Contents