Table of Contents
Advertisement
3-5. Connecting to Other Equipments
3-5-1. Connecting a computer
A computer cable, BNC cable (5-core type), HDMI cable, or a DisplayPort cable can be used to connect to a com-
puter.
The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection.
Analog RGB signal connection
•
Connect the computer cable to the display output terminal (mini D-sub 15 pin) on the computer and the COMPUTER
IN terminal on the projector. Please use a computer cable attached with a ferrite core.
•
When connecting the display output terminal (mini D-sub 15 pin) on the computer to the BNC input terminal, use
a conversion cable to convert the BNC cable (5 core) to a mini D-sub 15 pin cable.
• Select the source name for its appropriate input terminal after turning on the projector.
Input terminal
COMPUTER IN
BNC
COMPUTER IN
BNC IN
RGB - to - BNC cable
(not supplied)
Computer cable (sold commercially)
SOURCE button on the projector
cabinet
COMPUTER
BNC
3. Projector Adjustment and Connecting
NOTE: Please check the operating manual of the com-
puter as the name, position and direction of the terminal
may differ depending on the computer.
Button on the remote control
COMPUTER 1
COMPUTER 2
35
Advertisement
Table of Contents
