Cassette Player Operation; Playing A Cassette - Radio Shack AM/FM Stereo Cassette Owner's Manual

12-2115a.fm Page 21 Wednesday, January 12, 2000 11:18 AM

CASSETTE PLAYER OPERATION

PLAYING A CASSETTE

Caution: We recommend using C-60
or C-90 cassette tapes. Avoid using C-
120 cassette tapes. They are very thin
and can easily become tangled in the
tape-handling parts.
Follow these steps to play a tape.
1. Take up any slack by turning the
cassette's hub with your finger or a
pencil. Avoid touching the tape.
2. Insert the tape into the cassette
compartment with its open edge to
the right.
The tape begins to play, and the
direction indicator
appears.
3. If you are playing a metal tape,
press until
MTL MTL
display.
4. If you are playing
5. Adjust the volume, bass, treble, bal-
( or )
6. Press
appears on the
a tape encoded
with the Dolby B
NR system, press
. appears.
Press again when you finish play-
ing a Dolby tape.
ance, and fader settings as desired.
Notes:
• When the tape reaches the end of
one side, the cassette player
automatically changes the tape's
direction and plays the other side
of the tape.
• During play, you can switch to the
other side of the cassette by
pressing and
time until the indicator on the dis-
play changes direction.
to stop and eject the tape.
at the same
21