Engine Switch - Lexus RC 350 2015 Pre-Delivery Service Manual

INSPECTION DETAILS - B. LOCKS AND LIGHTS
RC350 shown (RCF similar)
POWER SUPPLY CHANGEOVER AND
ENGINE START/STOP
Check for proper activation of the "ENGINE" switch.
Power supply changeover
a) Carry the electronic key in the vehicle and apply the
parking brake.
b) Without depressing the brake pedal, press the
"ENGINE" switch and change the power supply.
OFF
1
Press once: ACCESSORY mode
2
3
Press twice: "IG-ON" mode
c) In each mode, check that the power supply has changed
properly.
Engine start/stop
a) Carry the electronic key in the vehicle and apply the
parking brake.
b) Check that the shift lever is in the"P" position.
c) While depressing the brake pedal, press the "ENGINE"
switch.
EXTERIOR LIGHTS
Walk around the vehicle and check that the following lights
illuminate:
a) Headlights
b) Parking lights and daytime running lights
c) Front side marker lights
d) Side turn signal lights
e) Stop/tail lights
f) Tail lights
g) Rear side marker lights
h) High mounted stoplight
i) License plate lights
j) Outer footlights
8 RC350/RCF