Mac Os X; Windows 7 - Cisco Linksys E4200 User Manual

Linksys E4200
3 . In the Type a name for this shortcut field, enter a
descriptive name and click Finish .
Create Shortcut - Name Shortcut
4 . Double-click the shortcut to access the USB storage
device .
Shortcut Icon

Mac OS X

1 . From your desktop, go to Finder > Go > Network .
Select Go > Network
2 . Double-click the server name .
NOTE: If you used the setup software for
installation, then the server name is the name
of your wireless network (up to 15 characters) .
If not, the server name is Cisco followed by the
last five digits of the router's serial number .
Maximum Performance Wireless-N Router
Appendix B: How to Connect and Access USB Storage
NOTE: It may take a few moments before the
router is detected . Please wait .

Windows 7

Access the USB Storage Device
1 . On your desktop, click the Windows Explorer icon .
NOTE: If the Windows Explorer icon is not
displayed, then go to Start > All Programs >
Accessories > Windows Explorer .
2 . In the Address field, enter the default IP address of the
router: \\192.168.1.1
NOTE: Another option is to use the Device Name
(Disk) of the router . In the Address field, enter:
\\Cisco followed by the last five digits of the
router's serial number . If you used the setup
software for installation, then enter the name of
your wireless network (up to 15 characters) in
the Address field .
Double-Click Server Name
Windows Explorer Icon
Enter Local IP Address of Router
50