Storage - Cisco Linksys E4200 User Manual

Linksys E4200
Edit an FTP Folder
FTP Server > FTP Folder
Make the appropriate changes to the following options:
Display Name The current Display Name is shown . To
change the name, enter a new name .
Partition The name of the partition is displayed .
Location The path to the displayed folder is displayed .
New Folder To create a new folder, enter its name and
then click Create .
Share Entire Partition If the FTP folder should include
the entire partition, select this option . If you do not want
to share the entire partition, then select the folder you do
want to share .
Folder The available folders are listed by Folder name .
• Enter into Folder To display subfolders, click this
option .
•
Select To specify a folder for FTP client access, click
Select .
• Return to Upper Folder To return to the previous
folder, click this option .
Access Specify which groups have read-and-write or
read-only access to the FTP folders . (To create groups, go
to "Create or Edit a Group Account" on page 31 .)
•
Available Groups To allow a group to access the
folder, select it, and then click the >> button .
•
Groups with Access To block a group from accessing
the folder, select it, and then click the << button .
Maximum Performance Wireless-N Router
Chapter 2: Advanced Configuration
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes . Click Close to exit this
screen and return to the FTP Server screen .
Storage > Administration
The Administration screen allows you to manage the
groups and individual users who can access the shared
folders .
Storage > Administration
Information
Administration > Information
FTP Server Name The display name of the FTP server
is displayed . The default is Cisco followed by the last 5
digits of the router's serial number, which is found on the
bottom of the router . If you used the setup software for
installation, then the FTP Server Name is the name of your
wireless network (up to 15 characters) .
Device Name (Disk) The Device Name (or NetBIOS
name) of the router is displayed . The default is Cisco
followed by the last 5 digits of the router's serial number,
29