Edimax BR-6258n Wi-Fi Connection Manual

Wi-fi instructions

Hide thumbs Also See for BR-6258n:

Download this manual See also: User Manual

How to make BR-6258n

connect to a Wi-Fi network

Thanks for purchasing Edimax BR-6258n. You may have a wifi network offer to you. For example, a wifi

network provided by hotel. We hope this instruction can help you setup BR-6258n associate with the

target wifi network. As a router, BR-6258n has basic firewall function embedded and can protect your

local network.

1. You can either use a wireless computer or use a hard wired computer.

2. Power on the BR-6258n router either use its power adapter or connect to a USB port of a computer.

3. Screen shots in this instruction are from a Windows 7 computer. Your computer may use different

operating system. You also may use Safari or other browser in different Operating system.

3350 Scott Blvd., Building #15

Santa Clara, California 95054, USA

Phone 408-496-1105 • Fax 408-980-1530

www.edimax.us

Page 1 1. You can either use a wireless computer or use a hard wired computer. 2. Power on the BR-6258n router either use its power adapter or connect to a USB port of a computer. 3. Screen shots in this instruction are from a Windows 7 computer. Your computer may use different operating system.
Page 2 If you do not have ethernet cable, you can make wireless connection to connect to SSID name “Edimax”. The quickest way is to click on Start, click on “Connect”, select Edimax wireless network to connect. You also can follow below steps.
Page 3 Choose either Continue or Apply. We suggest you click on Continue to setup wireless encryption of BR- 6258n network. If you click on Apply, BR-6258n would take 60 seconds to reboot and connect to Internet. BR-6258n has no wireless encryption yet.
Page 4 Nano router saves the settings and reboots. Wait for 60 seconds. Click on OK button after 60 seconds. Continue Step 4 if you use Ethernet cable to connect with BR-6258n. Continue Step 5 if you use wireless connection to connect with BR-...
Page 5 Reload the router’s configuration web page at http://192.168.2.1. You can find its Internet Connection status. In our example, BR-6258n wireless connect to a WiFi Hotspot and gets a dynamic IP address. Open a new tab and enter your preferred web site. If you can browse Internet, your configuration is successful.