Table of Contents
Advertisement
III. Browser Based Configuration Interface
After you have setup the BR-6208AC V2 as detailed in II. Installation or the
included Quick Installation Guide, you can use the browser based
configuration interface to configure advanced settings.
Please ensure that your computer is set to use a dynamic IP
address. Refer to
information.
III-1.
Login
1.
To access the browser based configuration interface enter
http://edimax.setup into the URL bar of a browser on a network device
connected to the same Wi-Fi network as the BR-6208AC V2.
If you can not access http://edimax.setup, connect the device to a
computer using an Ethernet cable and try again.
2.
You will be prompted for a username and password. The default
use a e is ad i
IV-1. Configuring your IP address
a d the default pass o d is
40
for more
.
Advertisement
Table of Contents
