Panasonic SA-HT833VP Service Manual page 17

15 No S-reel pulse when cassette is loaded
(Capstan system, S-reel system failure)
16 Cylinder lock detected during normal rotation
17 S-reel lock detected during normal running
18 T-reel lock detected during normal running
80 EJECT mode when an error is detected
2* Error during PG automatic adjustment
(Meaning of Additional data, (Data 1), VCR mode)
0 : STOP, 1 : EJECT, 2 : REW 3 : FF, 4 : REV, 5 : CUE, 6 : SLOW 7 : POWER OFF, 8 : PLAY, 9 : STILL, U : REC, A : REC
PAUSE, - : ADUB, N : ADUB PAUSE, L : INSERT, NONE DISPLAYED : INSERT PAUSE
(Meaning of Additional data, (Data 2), Tape position)
Type of tape
T-90 or above (Thin Hub)
T-60 or below (Thick Hub)
(Data 2 display)
*1 (Additional data, (Data 2)) (EJECT reason)
*Additional data 3 and 4
While the self-diagnosis history is displayed, press the STOP button (on the unit or the remote controller unit) to switch
between Additional data 3 and 4.
Criterion of tape position between starting and end terminals
Between starting terminal: L and end terminal: 1 with fourteen levels of change
Between starting terminal: U and end terminal: 5 with sic levels of change
Thin Hub
Thick Hub
Data 2
1 Loading completed when no tape is loaded. (spinning)
2 S-photo, S-reel, or Cap system failure during down short REW
operation
3 Mechanism locking during loading
4 L both terminals detected when loading starts
VCR mode S-reel pulse counting value Tape
VCR mode Processing number
VCR mode Processing number
VCR mode Processing number
VCR mode
VCR mode
L n -- A u 9 8 7 6 5 4 3 2 1
U 9 8 7 6 5
Reason
17
position
Tape
position
Tape
position
Tape
position
*1 Tape
position
- Tape
position
SA-HT833VP
None
None
FG count
FG count
None
None