Maintenance; Clean Spills; Clean The Instrument - Hach QbD1200 User Manual

Option Description
SST8000 Shows the instructions on the display about how to prepare the reagent and the standards.
Accuracy Shows the instructions on the display about how to prepare the reagent and the standards.
3. Enter the lot identification number (Lot ID) and the expiration date for the standards.
4. Push to start the procedure.
If necessary, push Pause or Cancel during the procedure.

Maintenance

Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the personal protective
equipment appropriate to the chemicals that are handled. Refer to the current safety data sheets
(MSDS/SDS) for safety protocols.

Clean spills

Chemical exposure hazard. Dispose of chemicals and wastes in accordance with local, regional and
national regulations.
1. Obey all facility safety protocols for spill control.
2. Discard the waste according to applicable regulations.

Clean the instrument

Clean the exterior of the instrument with a moist cloth, and then wipe the instrument dry.
Replace an instrument component
Pinch hazard. Parts that move can pinch and cause injury. Do not touch moving parts.
Refer to the ozone filter, UV reactor, syringe and tubing replacement kit documentation. Collect all of
the necessary items before these maintenance procedures start. Refer to the information on the
display for more replacement information.
*
This step does not apply to the background test.
D A N G E R
C A U T I O N
C A U T I O N
W A R N I N G
*
English 17