Lowrance 5 HDI Operator's Manual page 64

64
More options
Flipping the Structure image left/right
If required, the left/right SideScanning images can be flipped to
match the direction of the transducer installation.
Range Lines
Range lines can be added to the image to make it easier to estimate
distance.
Palettes
You can select between several display palettes optimized for a
variety of fishing conditions.
View
You can set up the StructureScan page as left only, right only, or
left/right side scanning.
Measuring distance
The cursor can be used to measure the distance between the
position of two observations on the image.
1.
Position the cursor on the point from where you want to
measure the distance
2.
Start the measuring function from the More options menu
option
Ú Note:
The measure function is not available in the menu unless
the cursor is placed on the image.
3.
Position the cursor on the second measuring point
- A line is drawn between the measuring points, and the
distance listed in the Cursor Information window
4.
Continue selecting new measuring points if required
You can use the menu to re-position the start point and the end
point as long as the measuring function is active.
When you select Finish measuring or press the Exit (X) key, the
measuring function stops. Press the Cursor/Waypoint key to remove
the cursor from the image and the image resumes to normal
scrolling.
StructureScan | Hook² Series Operator Manual