Lowrance 5 HDI Operator's Manual page 5

• HDI models: The SplitShot transducer should be used which
provides traditional sonar and DownScan functionality.
• TS models: The TripleShot transducer should be used which
provides traditional sonar, DownScan and Side/StructureScan
functionality.
Transducers added via one of the optional transducer adapter
cables will still only have the available views and frequencies that
the display is designed to work with. Airmar transducers are not
supported via the adapter cable.
In the manual, important text that requires special attention from
the reader is emphasized as follows:
Ú Note:
Used to draw the reader's attention to a comment or
some important information.
Warning:
Used when it is necessary to warn
personnel that they should proceed carefully to
prevent risk of injury and/or damage to equipment/
personnel.
Manual version
This manual is written for software version 1.0. The manual is
continually updated to match new software releases. The latest
available manual version can be downloaded from
www.lowrance.com.
The Software version
The software version currently on this unit can be found in the
About dialog. The About dialog is available in the System Settings.
For more information, refer to "About" on page 77.
For upgrading your software, refer to "Software upgrades" on page 81.
Preface | Hook² Series Operator Manual
5