Applications; Point-To-Point Application -- Lan To Lan Connection - Planet VC-232G User Manual

4. Applications

The EoC Converter does not require any software configuration.
Users can immediately use any feature of this product simply by
attaching the cables and turning the power on. There are some
key limitations on the EoC Converter. Please check the following
items
4.1 Point-to-Point Application -- LAN to LAN
Connection
One set of the EoC Converter could be used to link two local
area networks that are located in different places. Through
the coaxial cable, it could set up a 200/100Mbps asymmetric
backbone, but one EoC Converter must be Master (CO mode)
and the other one is Slave (CPE mode).
5V DC adapter
Switch
Connecting Standalone PC
Refer to the following procedures to set up the VC-232G LAN to
LAN connection.
1. [LAN1] Set the VC-232G at LAN 1 to be CO mode from the
DIP switch
2. [LAN2] Set the VC-232G at LAN 2 to be CPE mode from the
DIP switch
14
Point to Point Application
Ethernet over Coaxial
VC-232G
(CO)
Up to 1400m
VC-232G
(CPE)
Ethernet over VDSL 2 Converter
PC