Sendo Screenz - SENDO 8E30-00000-000 series Manual

6
with the holes on the phone - the cover
should click into place).
8
To replace the top part of the rear cover,
place the cover onto the back of the phone
and press into place, making sure the tabs
on the sides of the cover click into place.
9
Insert the battery into the phone, starting
with the top edge first. Align the tabs on
the edge of the battery with the tabs on the
back of the phone. Make sure the gold-
colored contacts of the battery are
touching the contacts on the phone. Push
down into place.
10
To replace the battery cover, place the
cover onto the back of the phone and slide
the cover into place, making sure the tab
at the top of the cover clicks into place.

Sendo ScreenZ

You can change the color background
graphic behind the phone's display (called
Sendo ScreenZ) as described below. Check
out the Sendo shop for compatible ScreenZ:
www.sendo.com/shop
!
Warning:
use with your S1 phone and approved by
Sendo. Use of any other ScreenZ may
damage your phone and may invalidate
your warranty.
To change the ScreenZ
1
Remove the battery cover, battery and
front cover as described above.
>
Note: You do not have to remove the top
part of the rear cover to change the
ScreenZ.
2
Insert a small, blunt, wooden or plastic
instrument (such as a pencil tip) into the
slot in the removal tab of the plastic
ScreenZ. Gently pull the ScreenZ down
and remove.
[[[ ]]]
20
Only use ScreenZ designed for