The Basics; Switching On/Off; Navigation And Scrolling; My Number - SENDO 8E30-00000-000 series Manual

Table of Contents

Advertisement

3

The basics

Switching on/off

To switch the phone on, press and hold d.
If the phone asks for a PIN code, enter the
code that is supplied with the SIM card. The
code will be displayed as asterisks. When
complete, press g, OK.
When you switch the phone on for the first
time (or after removing the battery) you may
also be asked to enter the date (in the format
mm/dd/yyyy). When complete, press g,
OK. You will then be asked to enter the time
(in 24 hour format). When complete, press
g, OK.
>
If you make a mistake, use the :
Note:
and ; navigation keys to move between
the characters.
Wait a few seconds while the phone searches
for the network. Once the network has been
found, the main screen appears and your
phone is ready to be used. The main screen
shows the network name and two icons
giving the signal strength (top right) and
battery level (top left).
To switch the phone off, press and hold d.

Navigation and scrolling

To enter the main menu on your phone, press
g,
Menu
from the main screen.
You can scroll through menus using the up
and down keys, : and ;. When you find
the menu option that you are looking for,
press g,
to activate. Press d,
Select
or c to return to the previous level.
?
Tip:
See the Shortcuts section on Page 8
for details of useful menu shortcuts.
This manual uses "Find it" notes to take you
directly to a feature. These notes always start
at the main screen. For example, the note
below indicates that you should press the left
soft key g, labeled
screen and then select the
option to open the Messages feature.
φ
Menu g Messages
Find it:
Back
Menu
in the main
Messages
menu
[[[

My number

Your phone number is stored on your SIM
card and should be stated in the
documentation that came with the card.
If you need to remind yourself of your
number, try calling another mobile phone
and make a note of the number that appears
on that phone's display. Alternatively, contact
your network service provider.
Your number may also be available through
the My number feature (if set by your network
service provider). Press d,
the main screen and select the
option. Select Consult, press d,
and select
Details
number (press c to return to previous
screens).

Screensaver

A screensaver is a picture or animation that is
displayed when the phone has been idle for
a certain amount of time.
When the screensaver is displayed, press the
c key to return to normal display (or press
g,
then * if the keypad is
Unlock
locked).
To modify the screensaver settings, see the
Display settings section on Page 29.

Power save

To get better battery performance, your
phone will automatically switch to power save
mode after it has been idle for a certain
amount of time. In this mode, the screen's
backlight is switched off and only the status
indicators are displayed.
When the power save mode is active, press
the c key to return to normal display (or
press g,
Unlock
locked).

SIM Toolkit

Your network service provider may offer
some special services or features using the
SIM Toolkit menu. However, the name of this
]]]
7
Contacts
from
My number
Options
to display your phone
then * if the keypad is
3

Advertisement

Table of Contents
loading

Table of Contents