Midland Syn-Tech III P25 Operation Manual page 46

4.2.4.2 Transmitting Acknowledged Individual Calls
The radio may also initiate
an acknowledged
individual call. This type of
call may not be supported
by other radios. To initiate
an acknowledged
individual call, press
INDEX then scroll to the
desired unit ID. While the
unit ID is displayed, press
the (pound) key.
The radio will send up to
four individual call
requests. If the receiving
radio accepts the call, the
initiating radio will enter
individual call mode.
Individual call initiation may be disabled in radio programming.
680-090-2040
Version 5.0eng
Press
INDEX
Use up/down
to scroll to
unit ID, then
press # key
If accepted,
radio enters
individual call
mode
Figure 4.37 – Transmitting acknowledged individual call
38
http://www.midlandradio.com
Syn-Tech III P25 Portable Radio
OPERATION MANUAL