Midland Syn-Tech III P25 Operation Manual page 44

4.2.3.2 Receiving Acknowledged Individual Calls
When an acknowledged
individual call request is
received, you may accept or
reject the call. The initiating
radio will receive the
accepted or rejected
response. If the call is
unanswered the display will
show the missed call.
If the call is accepted the
radio will enter individual call
mode and use the received
source ID as the destination
ID in individual call replies.
If no signal is received and PTT is not pressed for ten seconds, individual
call mode will time out.
680-090-2040
Version 5.0eng
Press
ACCEPT to
enter
individual
call mode
Individual
call time out
(after ten
seconds)
Figure 4.34 – Receiving acknowledged individual call
36
http://www.midlandradio.com
Syn-Tech III P25 Portable Radio
OPERATION MANUAL
Figure 4.35 – Missed individual call