Notes:
•
To listen to all activity on a current channel, short
press the SB1 to set the CTCSS/DPL code to 0.
This feature is called 'CTCSS/DPL Defeat
(Squelch set to SILENT)'.
•
(*) This assumes SB1 is not being programmed
for a different mode.
RECEIVING A CALL
1.
Select a channel by rotating the Channel
Selector Knob until you reach the desired
channel. An audible voice indicates the
selected channel.
2.
Make sure the PTT button is released and listen
for voice activity.
3.
The LED Indicator stays solid red when the
radio is receiving a call.
4.
To respond, hold the radio vertically 1 to 2
inches (2.5 to 5cm) from mouth. Press the PTT
button to talk; release it to listen.
TALK RANGE
TALK RANGE
Industrial
Model
Inside steel/concrete
Industrial buildings
UHF 4W Up to 350,000 Sq. Ft.
VHF 5W Up to 300,000 Sq. Ft.
DRAFT 1
Multi-Level
Inside multi-level
buildings
Up to 30 Floors
Up to 18 Floors
29
English