Eom Enabled; New Alert Tone Timer - Motorola RDU4100+ User Manual

The Weather Alert has two modes of
operations:
1. In Weather Channel Mode, the radio is in a
muted state until it detects the WAT/SAME.
When the radio detects the WAT, the radio
unmutes and allows the user to hear the
weather alert message.
2. In two-way mode (on two-way channel),
Weather Alert feature becomes a special scan
feature. The radio scans between the current
selected two-way channel and the selected
weather channel. When the radio detects WAT/
SAME signal on the weather channel, the radio
unmutes to allow the user to listen the weather
message. For Tone Alert, the radio stays in
receiving mode until weather signal is weak or
user presses the PTT button or changes the
channel using the Channel Selector Knob. For
SAME alert, whether the radio stays in
receiving mode or switches back to two-way
mode depending on the setting of the EOM
Enabled.
Warning: RDX radio does not detect Weather
Alert while it is receiving or
transmitting on a two-way channel.

EOM Enabled

This feature is only available for SAME Alert
mode and it is only effective when the radio
operates in two-way mode or Weather Channel
mode. When checked and in two-way mode,
the radio switches back to two-way channel
and continues to weather scan after it receives
end of message (EOM). For weather channel,
the radio mutes and continues to look for new
SAME alert after it receives EOM. When
unchecked, it stays in receiving mode until
weather signal is weak or user presses the PTT
button or changes the channel using the
Channel Selector Knob.

New Alert Tone Timer

Select a pre-defined time for a radio to play the
new alert tone. When a radio receives a new
SAME alert message, the LED screen lights up
DRAFT 1
49
English