Biostar M6VLQ Grand Manual page 31

c. "Auto-ov erclock button": User can click this button and [ WarpSpeeder™ ] will set
the best and stable performance and frequency automatically. [ WarpSpeeder™ ]
utility will execute a series of testing until system f ail. Then system will do f ail-saf e
reboot by using Watchdog f unction. A fter reboot, the [ WarpSpeeder™ ] u tility will
restore to the hardware de f ault setting or load the verif ied best and stable
frequency according to the Recovery Dialog's setting.
d. "Verify button": User can click this button and [ WarpSpeeder™ ] will proceed a
testing f or current frequency. If the testing is ok, then the current f requency will be
sa v ed into system registry. If the testing f ail, system will do a fail-safe rebooting.
After reboo t, the [ WarpSpeeder™ ] utility will restore to the hardware default
setting or load the verif ied best and stable frequency a ccording to the Recovery
Dialog's setting.
Note: Because the testing programs, invoked in Auto-overclock and Verify,
include DirectDraw , Direct3D and DirectShow tests, the DirectX 8.1 or newer
runtim e library is required. And please make sure your display card's color
depth is High color (16 bit) or True color( 24/32 bit ) that is required for
Direct3D rendering.
29