HP EliteOne 1000 G1 Maintenance & Service Manual page 51

To update SMBIOS information in Computer Setup:
1. Turn on or restart the computer.
2. Press Esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the
screen.
NOTE: If you do not press
Esc when the power button light turns white to access the utility.
3. Press F10 to enter Computer Setup.
4. Go to Main > Set Machine Unique Data.
5. If necessary, press
6. Edit the fields listed. If the feature byte has data or is not editable, then it was not cleared and cannot be
edited.
System ID Setup Page
Setup Field Name Comment
Product Name Enter the Model name/number or marketing name.
Serial Number Enter the Serial Number of Unit.
SKU Number Enter the SKU or Product Number including Localization Code.
Asset Tag Enter the 18-byte identifier assigned to the computer.
Feature Byte Enter the Feature Byte string. The feature byte string is case sensitive.
The label includes spaces after every four characters. You can enter or ignore these
spaces – their only purpose is to help with data entry. There is a character
limitation of 40 bytes per line. When you reach this limit, go to the next line to
continue data entry. BIOS ignores the spaces and lines.
If you make an error during data entry, the data will not validate, and the computer
asks you to correct your data input.
Build ID The Build ID of the unit.
Esc at the appropriate time, you must restart the computer and again press
Ctrl+A to initiate edit mode.
Label
Flexbuild
Support
Support
Support
Flexbuild
Flexbuild
System board 43