HP EliteOne 1000 G1 Maintenance & Service Manual page 27

b. Rotate the left side of the cover away from the base unit while being careful not to disconnect the
cable attached to the right side of the cover.
4. To replace the front access cover, press the cover straight down onto the base unit so that the cover
snaps in place.
IMPORTANT: Be sure to press this cover straight down. To avoid damaging components on the
underside of the cover, do not slide access cover into place.
5. To replace the rear access cover, slide tabs on the front of the rear cover under the slots on the rear of
the front cover (1), and then press the rear of the rear cover down (2). Make sure no wires or parts are
pinched as the cover is seated.
6. Reconnect the power cord and any external devices, and then turn on the computer.
Base unit access covers 19