Sending Data To Printers/Computers; Printing Data At Intervals; Sending Currently Displayed Data - Hach sension 4 Instruction Manual

SECTION 5,
continued

5.2 Sending Data to Printers/Computers

5.2.1 Printing Data at Intervals

5.2.2 Sending Currently Displayed Data

•
IBM PC/AT or compatible with a 386SX processor (16 MHz
or better)
•
4 megabytes of RAM
•
Hard disk drive with 2 megabytes or more of free space
•
3-1/2 inch, 1.44 megabyte floppy disk drive
•
VGA graphics with 640 x 480 or higher resolution, 16 or
more colors
•
Mouse or other pointing device
•
A 9-pin serial port (or 25-pin serial port with 9-pin adapter)
•
Windows 3.1 or later
•
DOS 3.3 or later
The last option in the Setup menu lets the user choose a print
interval. When this option is enabled, the meter will
automatically send data to a printer or computer at the selected
time interval. See Section 3.1.10 on page 30 for more information
on enabling this option
To print or transfer a current reading:
1. Wait until the display is stable. Press
Note: Data can be printed before the reading is stable. An asterisk will
be printed with the measurement data to indicate the stability criteria
were not met.
2. The word
PRINT
will return to Reading mode.
3. The printout for data that is printed without being stored will
not have a storage location number.
48
PRINT.
will be briefly displayed, then the meter