Table of Contents
Advertisement
Available languages
Available languages
STOPPING A COOKING ZONE
- Press the selection button of the required cooking zone.
- Press the "-" button to display heat level
off, the indicator
goes off after 10 seconds.
- To stop rapidly, press simultaneously the "-" and the
respective cooking zone selection.
The heat level automatically goes down to
zone goes off.
GENERAL STOP
The cooking zones and the timer can be stopped
at any moment by pressing the On-Off button.
RESIDUAL HEAT INDICATOR
The control panel tells the user when the surface temperature of
the cooking zones exceeds about 60°C, by the following
displaying:
. When the temperature goes back below 60°C, the
display goes off.
For ending the cooking, we advise switching off the cooking zone
and using the residual heat of the zone to finish cooking gently.
N.B. After a cut in the current, the residual heat indicator
disappears completely, even if the surface temperature exceeds
60°C.
. OPERATING THE ADDITIONAL COOKING ZONE
(TWO ZONES)
The cooking zone with two zones is
fitted certain models
.............................
It is active in totality when the cooking zone is in function ; the
control led of the additional cooking is displayed.
TYPE B
7
LED
To desactivate the additional cooking zone :
- Press again on the additional cooking zone touch. The Led goes
off when it is desactivated.
To re-activate the additional cooking zone :
- Press on the cooking zone button. The Led is active again.
PROGRAMMING A COOKING ZONE (according to the model)
Every cooking zone can be programmed for a maximum time of 99
minutes.
- Start the required zone by following the previous instructions.
- Press on simultaneously the touch "-" and "+" to activate the
timer, "
" is displayed.
TYPE B
7
LED
- Press again on the "+" button to select a time in minutes
between 0 and 99 minutes or press on the "-" button to decrease
the time between 30 minutes and 0. The timer control led near
the level is displayed.
--> the programmed time can be modified at any moment.
When the time is run, the cooking zone goes off automatically and
an audible beep sounds for 1 minute, press a button to stop it.
--> If any zone is activated, the timer can be used alone, as
reminder, it will ring at the end of the programmed time.
. Now the zone goes
. The cooking
>
Example
08 GB
LOCKING BUTTON OPERATION
The locking function prevents the children from starting the hob.
It is also used for cleaning the hob.
To lock the hob :
- Press the on/off button
4 zones
2 sec
. The hob is locked, the locking indicator "
zones for 20 seconds.
If a cooking zone is at stage "hot", L and H appear alternately.
To unlock the hob :
.
For the hob with 4 zones
procedure.
.
For the hob with 3 zones
the last stage you must to press the "-" touch instead the "+"
touch.
The indication "
L
" disappears. The hob is unlocked and
returns on stand-by mode.
. FAST HEATER OPERATION
Every cooking zone on the hob is equipped with a fast heater for
raising the cooking zone's temperature faster.
Starting the fast heater
- Press the on/off button
- Start the required zone, press the "
" ", release the button briefly and press again the " " button ;
9
the display alternates showing "A" "fast heater" and "9" heat
level.
- If necessary reduce to the required heat position, the display
alternates showing "A" "fast heater" and the new heat position.
Cooking
Power
position
released
(%)
0
:
0 %
:
2.5 %
1
:
3 %
2
:
6 %
3
:
11 %
4
:
16 %
5
:
19 %
6
:
32 %
7
:
45 %
8
:
65 %
9
:
100 %
E.g. 1800 W zone at position 6 = 32% of 1800 W power released
When the "Fast heater" is on, the zone supplies 1800 W power for
2.5 minutes, and adjusts to 576 W after this time.
* For increased safety, the cooking zones cut off automatically if
they are left on too long. The cut off depends on the heat level
used.
To desactivate the fast heater
- Switch on the cooking zone, press the " " button to come back
to a normal heat level, decrease to the heat level required or to
« 0 " to stop the cooking zone.
.
3 zones
L
" is displayed on all
" "
"
"
, to unlock follow the same
, follow the same procedure but in
.
+
" button to obtain position
+
Time of
Maximum
fast heater
operating
(minutes)
time before
automatic
cut off*
:
0
:
:
0
:
:
1
:
:
3
:
:
5
:
:
6,5
:
:
8,5
:
:
2,5
:
:
3,5
:
:
4,5
:
:
0
:
-
0 H
2 H
6 H
6 H
5 H
5 H
4 H
1,5 H
1,5 H
1,5 H
1,5 H
Advertisement
Table of Contents
