Snmp Config; Global Config - TP-Link T2500G-10TS User Manual

SNMP Management Station by configuring its view type (included/excluded). The OID of
managed object can be found on the SNMP client program running on the SNMP Management
Station.
2. Create SNMP Group
After creating the SNMP View, it's required to create an SNMP Group. The Group Name,
Security Model and Security Level compose the identifier of the SNMP Group. The Groups with
these three items the same are considered to be the same. You can configure SNMP Group to
control the network access by providing the users in various groups with different
management rights via the Read View, Write View and Notify View.
3. Create SNMP User
The User configured in an SNMP Group can manage the switch via the client program on
management station. The specified User Name and the Auth/Privacy Password are used for
SNMP Management Station to access the SNMP Agent, functioning as the password.
SNMP module is used to configure the SNMP function of the switch, including three submenus:
SNMP Config, Notification and RMON.

13.1 SNMP Config

The SNMP Config can be implemented on the Global Config, SNMP View, SNMP Group,
SNMP User and SNMP Community pages.

13.1.1 Global Config

To enable SNMP function, please configure the SNMP function globally on this page.
Choose the menu SNMP→SNMP Config→Global Config to load the following page.
Figure 13-3 Global Config
226