Snmp Config; Global Config - TP-Link JetStream T1500G-10MPS User Manual

SNMP Management Station by configuring its view type (included/excluded). The OID of
managed object can be found on the SNMP client program running on the SNMP Management
Station.
2. Create SNMP Group
After creating the SNMP View, it's required to create a SNMP Group. The Group Name, Security
Model and Security Level compose the identifier of the SNMP Group. The Groups with these
three items the same are considered to be the same. You can configure SNMP Group to control
the network access by providing the users in various groups with different management rights
via the Read View, Write View and Notify View.
3. Create SNMP User
The User configured in a SNMP Group can manage the switch via the client program on
management station. The specified User Name and the Auth/Privacy Password are used for
SNMP Management Station to access the SNMP Agent, functioning as the password.
SNMP module is used to configure the SNMP function of the switch, including three submenus:
SNMP Config, Notification and RMON.

13.1 SNMP Config

The SNMP Config can be implemented on the Global Config, SNMP View, SNMP Group,
SNMP User and SNMP Community pages.

13.1.1 Global Config

To enable SNMP function, please configure the SNMP function globally on this page.
Choose the menu SNMP→SNMP Config→Global Config to load the following page.
The following entries are displayed on this screen:
Global Config

SNMP:
Figure 13-3 Global Config
Enable/Disable the SNMP function.
187