Adjusting Movie Settings - FujiFilm X-H1 Owner's Manual

Adjusting Movie Settings

Movie settings can be adjusted using the
B MOVIE SETTING option in the shoot-
ing menu (
Depth of Field
Choose low f-numbers to soften background details.
N
The indicator lamp lights while recording is in progress (the B MOVIE
SETTING > TALLY LIGHT option can be used to choose the lamp—in-
dicator or AF-assist—that lights during movie recording and whether
the lamp blinks or remains steady). During recording, you can change
exposure compensation by up to ±2 EV and adjust zoom using the
4
zoom ring on the lens (if available).
If the lens is equipped with an aperture mode switch, select the ap-
erture mode before beginning recording. If an option other than A is
selected, shutter speed and aperture can be adjusted while recording
is in progress.
While recording is in progress, you can:
•
Adjust sensitivity
•
Use the VIEW MODE button and the eye sensor to switch between the
EVF and LCD monitor displays
•
Refocus using any of the following methods:
-
Press the shutter button halfway
-
Press the AF-ON button
-
Use touch screen controls
•
Display a histogram or artifi cial horizon by pressing the button to
which HISTOGRAM or ELECTRONIC LEVEL has been assigned
Recording may be unavailable at some settings, while in other cases
settings may not apply during recording.
The slot to which movies are recorded can be selected using the
D SAVE DATA SET-UP > SELECT SLOT(F SEQUENTIAL) option in
the D (setup) menu. To choose the focus area for movie recording,
select B MOVIE SETTING > FOCUS AREA (MOVIE) and use the focus
stick (focus lever) and rear command dial (
52
P
137).
Recording Movies
MOVIE SETTING
MOVIE MODE
FULL HD HIGH SPEED REC
FILM SIMULATION (MOVIE)
DYNAMIC RANGE (MOVIE)
WHITE BALANCE (MOVIE)
HIGHLIGHT TONE (MOVIE)
SHADOW TONE (MOVIE)
COLOR (MOVIE)
P
69).
EXIT