Using Two Cards - FujiFilm X-H1 Owner's Manual

Removing Memory Cards
Before removing memory cards, turn the camera off and open the memory
card slot cover.
Press and release the card to eject it part way (to
prevent the card falling from the slot, press the
center of the card and release it slowly, without
removing your fi nger from the card). The card
can then be removed by hand.

Using Two Cards

The camera can be used with two cards, one in each of its two
slots. At default settings, photos are saved to the card in the sec-
ond slot only when the card in the fi rst slot is full. This can be
changed using D SAVE DATA SET-UP > CARD SLOT SETTING
(STILL IMAGE).
Option Option
The card in the second slot is used only when the card in
the fi rst slot is full. If the second slot is selected for D SAVE
SEQUENTIAL
DATA SET-UP > SELECT SLOT(xSEQUENTIAL), re-
(default)
cording will start on the card in the second slot and switch
to the fi rst slot when the card in the second slot is full.
BACKUP Each picture is recorded twice, once to each card.
As for SEQUENTIAL, except that the RAW copy of pictures
taken with FINE+RAW or NORMAL+RAW selected for
H IMAGE QUALITY SETTING > IMAGE QUALITY will
RAW / JPEG
be saved to the card in the fi rst slot and the JPEG copy to
the card in the second slot.
The card used to store movies can be selected using D SAVE
DATA SET-UP > SELECT SLOT(FSEQUENTIAL).
Description Description
Inserting Memory Cards
Display Display
2
35