Continuous Shooting (Burst Mode) - FujiFilm X-H1 Owner's Manual

I

Continuous Shooting (Burst Mode)

Capture motion in a series of pictures.
1
Rotate the drive dial to select the
overall frame advance rate from
CH (high), CM (medium), and CL (low).
2 If you selected CH or CL in Step 1,
use A SHOOTING SETTING > DRIVE
SETTING to choose the frame rate
(in CM mode, the camera shoots at
about 6 fps).
N
This feature can also be accessed via shortcuts (
3
Keep the shutter button pressed to take photos at the rate
selected in Step 2.
N
Shooting ends when the shutter button is released or the memo-
ry card is full.
O
If fi le numbering reaches 999 before shooting is complete, the remain-
ing pictures will be recorded to a new folder.
Burst shooting may not begin if the space available on the memory
card is insuffi cient.
Frame rate varies with the subject, shutter speed, sensitivity, and focus
mode. Frame rates may slow and recording times increase as more
shots are taken. The fl ash may or may not fi re, depending on shooting
conditions.
P
212).
85
5