Display Text; Supervisor Mode - Sharp UP-3301 Programming Manual

10. [10 SUPERVISR ON/OFF]
DISPLAY: Setting item menu screen
Select "10 SUPERVISR" and press the ENTER key.
DISPLAY: Supervisor ON/OFF screen
SELECT

DISPLAY TEXT

ITEM
OFF

SUPERVISOR MODE

ON
Select the desired setting and press the ENTER key.
11. [11 MEMORY INITIAL]
DISPLAY: Setting item menu screen
Select "11 MEMORY INITIAL" and press the ENTER key.
MRS NOTE
Select and press
the LIST Key.
UP-3301UP SRV MODE PROGRAMMING ("2 SETTING")
– 34 –
DISPLAY: The following display is shown.
All itemizers and totals are reset to default values when the YES
key is depressed.
12. [12 SSP]
DISPLAY: Setting menu select screen
Select "12 SSP" and press the ENTER key.
DISPLAY: SSP menu screen
Select the item and press the ENTER key.
The contents of the SSP menu are shown in the table below.
DISPLAY TEXT
SSP INPUT Used for SSP data input.
SSP EDIT USED for editing SSP data.
SSP ALL CLEAR Used to erase all the stored SSP data.
SSP IND. CLEAR Used to erase stored SSP data individually.
SSP REACTIV. Used to restore erased SSP data.
CONTENTS