Chapter 3. Reading Of Srv Program - Sharp UP-3301 Programming Manual

CHAPTER 3. READING OF SRV PROGRAM

The setting contents of the SRV mode can be reviewed on the display
or printer.
DISPLAY: SRV mode screen
Select "1 READING" and press the ENTER key.
DISPLAY: READING menu selection screen
Select the desired item, press the ENTER key.
DISPLAY: OUTPUT to destination selection screen
Select the output desired item, press the ENTER key.
The setting content is displayed or printed.
Sample of program reports
1. [1 SYSTEM PRESET]
DISPLAY:
PRINTER:
UP-3301UP READING OF SRV PROGRAM
– 5 –
Report title
JOB# / Data
Transaction Z1 reset counter
Transaction Z2 reset counter
Consolidation Transaction Z1 reset counter
Consolidation Transaction Z2 reset counter
Server Z1/Z2 reset counter
Houlry Z1 reset counter
PLU Z1/Z2 reset counter
GLU / PBLU Z1 reset counter
DRIVE THRU Z1 reset counter
Daily net Z2 reset counter
Department Z1 reset counter
Department Z2 reset counter
GT2
GT3
TRAINING GT
SUPERVISOR MODE
OP X/Z mode secret code
X1 mode secret code
AUTO KEY mode secret code
REG mode secret code
START UP secret code
Report title
Device name / Notassigned
Device name / Terminal No. / Channel No.
Auto cutter function
Printer name
Paper sheet type
CAT#2 execute
CAT#2 report