Zte Z3001S User Manual page 56

Method two: PIN
1. Swipe up from the bottom of the home screen and tap
Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On
3. Tap > Advanced > WPS Pin Entry.
4. The WPS PIN displays on the screen. Enter the PIN into
the access point's setup page.
After entering the PIN, your phone automatically finds the
access point and configures the connection.
NOTE: For detailed information about the WPS feature of the
access point, please refer to its documentation.
Adjusting Advanced Wi-Fi Settings
1. Swipe up from the bottom of the home screen and tap
Settings > Wi-Fi.
2. Tap to adjust the following settings.
• Network notification: Get notifications in the Status
Bar when Wi-Fi is on and an open network is available.
• Keep Wi-Fi on during sleep: Choose whether or not to
keep Wi-Fi on in sleep mode.
• MAC address: Check the MAC address.
IP address: Check the phone's IP address.
•
position.
56