Cisco Catalyst 3850 Hardware Installation Manual page 13

Switch Installation
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
Warning
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack.
Statement 1006
This figure shows the standard 19-inch brackets and other optional mounting brackets. You can order the
optional brackets from your Cisco sales representative.
Figure 12: Rack-Mounting Brackets
1 19-inch brackets (C3850-RACK-KIT=)
2 Extension rails and brackets for four-point
mounting, includes 19-inch brackets.
(C3850-4PT-KIT=)
3 ETSI brackets (C3850-RACK-KIT=)
OL-26779-05
4 23-inch brackets (C3850-RACK-KIT=)
5 24-inch brackets (C3850-RACK-KIT=)
Catalyst 3850 Switch Hardware Installation Guide
Rack-Mounting
13